Kyocera KM-4800w User Manual page 44

<Enable Clipping>
When this is checked, the value of HPGL PS command is taken as the size of
image.
When this is not checked, image size is taken from minimum to maximum of
image.
<Enable Pen Scale>
If you check "Pen Scale", the pen width is also enlarged or reduced if output size
is enlarged or reduced.
If you do not check it, the pen width is same even if output size is enlarged or
reduced.
<Cut and feed by SP/SP0>
When this is checked, multi-files are outputted since SP/SP0 command is
recognized as a boundary of multi-drawing if it is included in the file.
<Enable LA Setting>
If you check "Enable LA Setting", line processing is fixed as below.
Line Ends: Round
Line Joins: Rounded Join
<Enable MC Setting>
If you check "Enable MC Setting", MC1 is validated.
<Enable RP Setting>
This is not available.
<Halftone Screening>
This function is validated with "Enable MC Setting" on.
Can be specified among Screening 1 (fine) to Screening 5 (coarse).
Note: Select "Not Use" when you are satisfied with existing image.
Note: If some of the above items are modified, click [Enter] button, and
register the configuration.
43