[Calcomp]
<Pen Width Mode>
<Grayscale Mode>
When "Values in file" is selected, the values of Pen Width and Grayscale specified
in the file are effective, respectively.
When "User defined values" is selected, the values of Pen Width and Grayscale
effect according to the following User setting, respectively.
• Pen Size
When "User defined values" is selected, a value of Pen Size specified by
User is effective.
• Grayscale
When "User defined values" is selected, a value of Grayscale specified by
User is effective.
<Pen Management>
• Read
Loads an acquired pen setting.
• Save
Saves the current pen setting.
<Synchronization Setting>
A preferable Synchronization can be specified by either Automatic Setting or
Manual Setting.
Check "Auto Detection" in normal use. You can manually configure "Double Sync",
"Checksum", "Sync-Cha" and "End-Char".
36