Kyocera KM-4800w User Manual page 68

[Scan to FTP]
Specify the destination for Scan to FTP.
BUTTON 7 and 8 correspond to FTP 1 and 2 in FTP Folders' names.
Each FTP Folder's name can be changed at your option.
Maximum number of letters available for FTP Folder's name is 12.
<Input Password when Scanning>
Requires a password entry to save a scan data to the concerning Scan Folder.
An operator should enter a password on Operation Panel.
Click "Config Password" to change the password.
<Sending Path>
When set the sending path destination to a subdirectory, describe the path with slash (/) as a
path separator.
ex) /scanfile/technical/service/
Note: Click "Enter" to validate setting changes.
The changes will not be saved without "Enter"
67