Kyocera KM-4800w User Manual page 41

1. image size = paper size
2. image size < paper size
Mode3: Print an image, if any paper exists.
The Paper Priority in Selection:
1. image size = paper size
2. image size < paper size
3. image size > paper size
<Tolerance>
Even if output file size is larger than regular paper size, it is possible to output on
its regular size, up to the value of tolerance. When paper size is selected, even if
output file size is little bit larger than regular paper size, it is possible to output on
the paper or regular size by changing the value of tolerance due to the allowance
value is expanded"
<Screening>
Change print pattern of gray area. Adjust the gray area, which is described in grid,
by changing the number of lines and the angle. It is possible to change the pattern
of gray by changing the number of lines per inch (lpi) and the angle of line"
<Resolution Conversion>
Non 600dpi image can be printed with high quality.
However it takes longer time than usual until printing is finished.
<Number of Copies>
Setting of number of print
1 – 999
<Rotation>
Select output direction
Auto
0
90
180
270
<Tray Selection>
Select paper deck
Auto
Deck 1
Deck 2
Bypass
40