Kyocera KM-4800w User Manual page 33

<Rotation>
Select output direction
Auto
0
90
180
270
<Tray Selection>
Select paper deck
Auto
Deck 1
Deck 2
Bypass
<Cut Mode>
Select cut mode of paper
Check
No check
<Mirror>
Setting of mirror
<Negative Image>
A mirror image can be printed
<Scale>
Configures the magnification setting
When specified X-direction and Y-direction separately, check "X, Y Separate".
<Margin>
Add a preferable margin to the leading edge and the trailing edge of output print.
Leading Edge
Trailing Edge
<Density>
Set Image Density
When input value is smaller, it shows lighter image, and vice versa.
1 - 9
<Image Shift>
Set if Image is required to shift from the center.
When "Set" button is clicked, the following dialog is popped up.
Standard Cut
Synchronized Cut
0 to 500mm
0 to 500mm
32