Detaching And Refitting The Waste Toner Duct - Kyocera Mita FS-C5016N - Color LED Printer Service Manual

FS-C5016N

(6) Detaching and refitting the waste toner duct

Procedure
1. Remove the primary transfer unit (see page
1-6-15).
2. Unlatch the three latches and then remove
the waste toner duct.
3. Check or replace the waste toner duct and
then refit all the removed parts.
1-6-36
Latches
Waste toner conveying duct
Figure 1-6-48