Primary Transfer Section; Detaching And Refitting The Primary Transfer Unit - Kyocera Mita FS-C5016N - Color LED Printer Service Manual

FS-C5016N

1-6-7 Primary transfer section

(1) Detaching and refitting the primary transfer unit

Procedure
1. Remove the all drum units (see page 1-6-
12).
2. Pull two handles and raise.
3. Remove the primary transfer unit with the
handles.
4. Check or replace the primary transfer unit
and then refit all the removed parts.
1-6-14
Handle
Figure 1-6-18
Primary transfer unit
Handle