Detaching And Refitting The Paper Feed Drive Unit - Kyocera Mita FS-C5016N - Color LED Printer Service Manual

FS-C5016N

(2) Detaching and refitting the paper feed drive unit

Procedure
1. Remove the right cover (see page 1-6-3).
2. Remove five connectors.
3. Remove the harness from the two wire
hooks.
4. Remove the three screws and then remove
the paper feed drive unit.
5. Check or replace the paper feed drive unit
and then refit all the removed parts.
1-6-32
Wire hooks
Connectors
Figure 1-6-43
Figure 1-6-44
Connectors
Paper feed drive unit
Screws