Changing Batteries; Replacing The Battery - Gateway MX6960 Reference Manual

Changing batteries

Replacing the battery

Warning
Danger of explosion if
battery is incorrectly
replaced.
Replace only with a
battery specifically
manufactured for your
Gateway notebook.
Discard used batteries
according to local
hazardous material
regulations.
The battery used in this
device may present a
fire or chemical burn
hazard if mishandled.
Do not disassemble,
heat above 212°F
(100°C), or incinerate.
Dispose of used
battery promptly. Keep
away from children.
Caution
If your notebook is
connected to AC
power, you can
change the battery
while the notebook is
turned on. If your
notebook is not
plugged into an AC
outlet, you must turn
the notebook off while
changing the battery
or you will lose any
unsaved data
To replace the battery:
If your notebook is on and is connected
1
directly to AC power, go to
-OR-
If your notebook is on and is not plugged
into an AC outlet, save your work and turn
off the notebook.
Close the LCD panel.
2
Turn your notebook over so the bottom is
3
facing up.
Slide the battery lock to the unlocked
4
position.
.
Slide the battery release latch, then slide
5
the battery out of the notebook.
Slide a recharged battery into the
6
notebook until it snaps into place.
Changing batteries
Step 2.
49