Gateway MX6960 Reference Manual page 81

Tips & Tricks
The screw hole is
marked with a K.
Adding or replacing memory modules
Pull the memory module out of the slot.
10
Hold the new or replacement module at a
11
30-degree angle and press it into the
empty memory slot. This module is keyed
so it can only be inserted in one direction.
If the module does not fit, make sure that
the notch in the module lines up with the
tab in the memory bay.
Replace the memory bay cover, then
12
tighten the cover screws.
Replace the keyboard screw.
13
Insert the battery, then turn your notebook
14
over.
Connect the power adapter, modem cable,
15
and network cable, then turn on your
notebook.
Reconnect all peripheral devices and
16
replace any PC cards.
75