Changing Batteries; Replacing The Battery - Gateway 200 User Manual

Changing batteries

If your notebook is connected to AC power, you can change the battery while
the notebook is turned on. If your notebook is not connected to AC power,
you must turn the notebook off while changing the battery.
Warning

Replacing the battery

To replace the battery:
1
If your notebook is on and is connected to AC power, go to Step 2.
-OR-
If your notebook is on and is not plugged connected to AC power, save
your work and turn off the notebook.
2
Close the LCD panel.
3
Turn your notebook over so the bottom is facing up.
Danger of explosion if battery is incorrectly replaced.
Replace only with a Gateway 200ARC battery. Discard
used batteries according to the manufacturer's
instructions.
The battery used in this device may present a fire or
chemical burn hazard if mishandled. Do not disassemble,
heat above 212°F (100°C), or incinerate. Dispose of used
battery promptly. Keep away from children.
www.gateway.com
Changing batteries
159