Using A Cd Or Dvd - Gateway MX6960 Reference Manual

CHAPTER 4: Using Drives and Accessories

Using a CD or DVD

Important
DVD discs and drives
contain regional codes
that help control DVD
title exports and help
reduce illegal disc
distribution. To be able
to play a DVD, the
disc's regional code
and your DVD drive's
regional code must
match.
The regional code on
your DVD drive is
determined by your
notebook's delivery
address. The regional
code for the United
States and Canada is
1. The regional code
for Mexico is 4. Your
DVD drive's regional
code must match the
regional code of the
disc. The regional code
for the disc is on the
disc, disc
documentation, or
packaging.
Important
When you place a
single-sided disc in the
tray, make sure that
the label side is facing
up. If the disc has two
playable sides, place
the disc so the name of
the side you want to
play is facing up.
Tips & Tricks
For information about
cleaning a CD or DVD,
see "Cleaning CDs or
DVDs" on page 68.
34
[
To insert a CD or DVD:
Press the eject button on the CD or DVD
1
drive. After the tray opens slightly, pull the
disc tray completely open.
Place the disc in the tray with the label
2
facing up, then press down carefully on the
disc until it snaps into place.
Push the tray in until it is closed.
3
Manual eject hole
Eject button