Positioning Original On Platen Glass - Kyocera Mita KM-8530 Operation Manual

Positioning Original on Platen Glass

Use the platen glass when originals are not suitable for use with the document feeder,
e.g., when size is incompatible, or when originals are folded, stapled, torn, or in
generally poor condition.
1.
Raise the document feeder.
Place original FACE DOWN in the right rear corner, aligning the edge with the right
measuring guide.
2.
Gently close the document feeder to prevent the original from
shifting on the glass.
3-6
Reminder!
When selecting Dual Page, Non-Image Area Erase, AUTO mode in
Repeat, or AUTO Layout, DO NOT CLOSE the document feeder. For
details on each function, see Section 9.
CAUTION
Do not place too heavy originals, or do not press strongly
when thick original is placed and is under pressure of RADF;
otherwise the glass may be broken and you may be injured.
Positioning Originals (continued)