2A3/4
2-2-3 Original misfeed detection
When an original jams, the machine immediately stops operation and a message is shown
on the touch panel in the operation unit. The SRDF original set indicator also flashes red.
To remove the jammed original, open the SRDF or DF original reversing cover.
To reset the original misfeed detection, open and close the SRDF or DF original reversing
cover to turn DF safety switch 1 or 2 off and on.
OSBSW
OFM
OFSW
OCM
DFTSW
Figure 2-2-4 Original misfeed detection
2-2-14