Loading Tabbed Sheets In Tray 1, 2, Or 3 - Kyocera Mita KM-8530 Operation Manual

Loading Tabbed Sheets in Tray 1, 2, or 3

When TAB is displayed on the tray key of the Basic Screen, follow the procedure
below to supply the tray with tabbed sheets.
1.
Withdraw tray 1, 2, or 3.
2.
Open the paper feed roller.
3.
Place the tabbed sheets on the tray as illustrated above.
4.
Move the green levers (located at the front and the left side) to the
edge of the paper.
5.
Close the paper feed roller, then push in the tray until it locks into
place.
2-28
HINT
The tray paper type can be specified in the Key Operator setting. For
details, see p. 13-23 to p. 13-24.
Reminder!
The tab extension width should be 12.5mm or less.
Loading Paper (continued)