Checking Feature Selections And Proof Copying; C Hecking Feature Selections And Proof Copying; Check Mode; Proof Copy - Kyocera Mita KM-8530 Operation Manual

Checking Feature Selections and Proof Copying

Use the Check mode to confirm copying selections before starting print operation.
In this mode, use Proof copy to produce a sample of the copied set before making
multiple copies. This is a convenient and cost effective way of viewing the results of the
following copying selections.
• Copying conditions using Store mode
• Sheet/Cover insertion
• Chapter
• Combination
>>>
Specifications for Check Mode and Proof Copy<<<
❒
Proof copy is available when using RADF, or Platen store mode for multiple
originals.
❒
Proof copy cannot be used for testing the Userset density.
❒
Proof copy is unavailable with Group output mode.
1.
Select the desired copy conditions and enter the desired print quantity.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Position original(s).
See p. 3-2 to p. 3-6 for details on positioning originals.
3.
Press [CHECK] on the control panel.
The Check Screen will be displayed.
• Booklet
• Image insert
• Book Copy
• Program job
Reminder!
HINT
SCAN / SERVER
PRINT
CHECK HELP
JOB MEMORY
AUTO RESET
COUNTER CL
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
DF-630/635
Output Modes
Binding
Mode
Recalling
Previous Job

Check Mode

& Proof Copy

Interrupt

Mode
3-53