Main Body Specifications
Recommended Operating Environment
Originals in Document Feeder
These specifications are subject to change without notice.
6-2
Product Name
Configuration
Photoreceptor
Method
Toner
Warm Up
Auto Reset
First Copy Out Time
Copy Rate
Continuous Copy
Voltage
Current
Frequency
Grounding
Power Consumption
Noise Level (full system)
Automatic Modes
Magnification
Originals on Platen
KM-8530
Console with stationary platen
OPC drum
Laser Electrostatic
Black, cartridge type
50°~86°F (10°~30°C); 10~80% RH
Approx. 6 min. @68°(20°C); 50% RH
Off/30 sec./1 min./1.5 min./2 min./2.5 min./3
min./3.5 min./4 min./4.5 min./5 min.
From Platen Glass:
3.3 sec. for 8.5"x11"
85 cpm: 8.5"x11", 5.5"x8.5"
70 cpm: 8.5"x11"R
57 cpm: 8.5"x14"
49 cpm: 11"x17"
1~9,999 copies
208~240V AC14 to 10.6%
17.6A Dedicated line recommended
60Hz
Isolation recommended
Max. 3,840 VA (full option)
Approx. 78 dB (A) or less, during copying
AMS; AES (plus 9-level manual density);
APS detects 11"x17", 8.5"x14", 8.5"x11"R,
8.5"x11", 5.5"x8.5"
Presets; 0.50, 0.65, 0.77, 0.93, 1.21, 1.29, 1.55,
2.00
3 User Sets - 0.25~4.00, set by key operator
Zoom range -0.25~4.00 in 1% steps
Max. size: 11"x17" (280mmx432mm)
ADF mode: 1>1; 1>2
11"x17"; 8.5"x14"; 8.5"x11"R; 8.5"x11";
5.5"x8.5"; 5.5"x8.5"R
Max. 100 sheets (20 lb) feed/exit capacity