Erasing Outside Of The Original (Non-Image Area Erase); E Rasing Outside Of The Original (Non-Image Area Erase) - Kyocera Mita KM-8530 Operation Manual

Erasing Outside of the Original (Non-Image Area Erase)

The Non-image area erase mode is used to copy non standard or special originals, such
as books, magazines, paste-ups, graphs, thick or thin materials, etc. from the platen
glass. The exposed glass area outside the borders of the original will not be copied.
>>>Specifications for Non-Image Area Erase<<<
❒
Use the platen glass only. Keep RADF open throughout the procedure.
❒
Incompatible Conditions: Using RADF, 2 a 2, 2 a 1, APS, AMS, Rotation, Rotation
Sort, Rotation Group, Folding, Stapling&Folding, Trimming, Mixed Original, Z-
Folded Original, Sheet/Cover Insertion, Chapter, Combination, Booklet, Image
Insert, Book Copy in RADF Store mode, Reverse Image, All-image Area, Reduce
& Shift in Image Shift, Storing Image in Overlay Memory
Set original
1.
Touch APPLI. on the Basic Screen.
When starting a new copying job, be sure to close the RADF securely,
then press [AUTO RESET].
2.
Touch Non-image Area Erase on the Application Selection Screen.
The incompatible function keys will be dimmed to show inactivity.
General copying
Reminder!
Non-Image Area Erase
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
Transparency
Interleave
Image Insert
Book Copy
Program Job
Non-Image
Area Erase
Reverse
Image
Repeat
9
Applications
Frame/Fold
Erasure
AUTO
Layout
All-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
9-29
Overlay
Memory