Canon Color imageCLASS MF8170c Facsimile Manual page 72

Cause 2
Remedy
CHECK PAPER SIZE
Cause
Remedy 1 Load the correct paper size or change <PAPER SIZE> in <PAPER SETTINGS>
Remedy 2 If you are trying to print a report or list, set the paper size setting to <LTR>,
DOCUMENT TOO LONG
7
Cause
Remedy
MEM IN USE nn %
Cause
Remedy
MEMORY FULL
Cause 1
Remedy
7-2 LCD Messages
The ADF roller rotates without feeding documents.
Fan the edge that will feed into the machine first, then tap the edge of multiple
page documents on a flat surface to even the stack.
The size of the paper in the cassette or multi-purpose feeder is different from
that of the paper specified in <PAPER SIZE> in <PAPER SETTINGS> of the
Menu.
of the Menu. For more information, see the following:
Chapter 2, "Paper Handling," in the Basic Guide
Chapter 5, "Copying," in the Basic Guide
Then reset the machine by opening the cartridge cover and then closing it.
<LGL> or <A4> and load paper of the same size. Then reset the machine by
opening the cartridge cover and then closing it. The report or list will then be
printed automatically.
The document is longer than 1 m, or is not feeding correctly.
Reduce the length of the document to within 1 m, and then re-send it.
Shows the percentage of the memory currently in use. This message is
displayed when you set the document in ADF.
If you need more space, wait for the machine to send any faxes in memory. Also
print or delete any documents in memory you no longer needed.
The memory becomes full during sending, or receiving the fax.
When sending the document, divide it into a few parts or select a lower fax
resolution.
If you need more space, wait for the machine to send any remaining faxes.
If <MEMORY FULL> appears while scanning documents using the ADF, the
document being scanned stops in the ADF. In this case, clear the paper jam in
the ADF. (See Chapter 9, "Troubleshooting," in the Basic Guide.)