Canon Color imageCLASS MF8170c Facsimile Manual page 66

Press [Menu].
Press [ (-)] or [ (+)] to select <FAX SETTINGS> ➞ press [Set].
Press [ (-)] or [ (+)] to select <REPORT SETTINGS> ➞ press [Set].
Press [ (-)] or [ (+)] to select <TX REPORT> ➞ press [Set].
Press [ (-)] or [ (+)] to select the setting you want ➞ press [Set].
You can select from the following:
- <PRINT ERROR ONLY> to print a report only when a transmission error occurs
- <OUTPUT YES> to print a report every time you send a document
- <OUTPUT NO> to disable printing the report
6
● If you selected <PRINT ERROR ONLY> or <OUTPUT YES>:
❑
Press [Stop/Reset] to return to the standby display.
6-6 Adjusting the TX REPORT Setting
You can set whether to print the first page of the fax under the report. Press [ (-)] or
[ (+)] to select <OFF> or <ON> ➞ press [Set].
- <OFF> to print no first page
- <ON> to print the first page