Canon Color imageCLASS MF8170c Facsimile Manual page 88

3. REPORT SETTINGS
1. TX REPORT
2. RX REPORT
3. ACTIVITY REPORT
8
4. TX SETTINGS
1. ECM TX
2. PAUSE TIME
3. AUTO REDIAL
4. TIME OUT
8-4 Menu Descriptions
Name
ON
PRINT ERROR ONLY
REPORT WITH TX IMAGE
OFF
ON
OUTPUT YES
REPORT WITH TX IMAGE
OFF
ON
OUTPUT NO
OUTPUT NO
PRINT ERROR ONLY
OUTPUT YES
OUTPUT YES
OUTPUT NO
ON
OFF
ON
1. REDIAL TIMES
2. REDIAL INTERVAL
OFF
ON
Descriptions
Receives the fax only from the sending fax machine that sends the TSI
signal.
Sets the settings related to report functions.
Enables/disables automatic printing of a transmission report.
Prints a report only when a transmission error occurs.
Enables/disables printing of the first page of the fax under the report.
No first page is printed.
Prints the first page.
Prints a report every time you send a document.
Enables/disables printing of the first page of the fax under the report.
No first page is printed.
Prints the first page.
No report is printed.
Enables/disables automatic printing of a reception report.
No report is printed.
Prints a report only when a reception error occurs.
Prints a report every time you receive a document.
Enables/disables automatic printing of a transaction report after every 20
transactions.
Prints a report automatically after every 20 transactions.
No ACTIVITY REPORT is printed.
Sets the transmission functions.
The ECM (Error Correction Mode) transmission is turned on or off.
All transmissions are conducted with ECM if the other party's fax
supports ECM.
ECM is turned off.
Sets the length of the pause you insert into a dialing sequence.
1SEC to 15SEC (2SEC)
Sets whether to perform automatic redial when the other line is busy or
no answer.
Customizes the redial operation.
Sets the number of retries.
1TIMES to 10TIMES (2TIMES)
Sets period of time between redialings.
2MIN. to 99MIN. (2MIN.)
After the first attempt at dialing fails, redialing is not attempted.
Enables/disables automatic scanning of documents after the fax number
is entered by using speed dialing.
Scanning begins automatically in 5 or 10 seconds after you enter the fax
number.