Canon Color imageCLASS MF8170c Facsimile Manual page 89

Name
OFF
5. RX SETTINGS
1. ECM RX
ON
OFF
2. FAX/TEL OPT. SET
1. RING START TIME
2. F/T RING TIME
3. F/T SWITCH ACTION
3. DRPD:SELECT FAX
4. INCOMING RING
OFF
ON
RING COUNT
5. MAN/AUTO SWITCH
ON
F/T RING TIME
OFF
6. REMOTE RX
ON
REMOTE RX ID
OFF
7. RX REDUCTION
Descriptions
Press [B&W Start] to scan document. Otherwise, AUTO CLEAR function
activates and the LCD returns to standby display after 1 minute. (See
Chater 10, "Machine Settings," in the Basic Guide.)
Sets the reception functions.
The ECM (Error Correction Mode) reception is turned on or off.
All receptions are conducted with ECM if the other party's fax supports
ECM.
ECM is turned off.
If you select <FaxTel> as the receive mode, customizes its settings.
Selects the time the machine takes to check whether a call is a fax or
voice call.
0SEC to 30SEC (6SEC)
Selects the ring length for voice calls.
15SEC to 300SEC (15SEC)
Selects whether the machine switches to receive mode after the ring
time has elapsed, or whether if disconnects the call.
RECEIVE, DISCONNECT
Selects the ring pattern for fax calls.
NORMAL RING, DOUBLE RING, SHORT-SHORT-LONG,
SHORT-LONG-SHORT, OTHER RING TYPE
Sets whether the telephone rings when it receives a voice call, enabling
you to answer the call. This function is only available when the fax
receive mode is set to <FaxOnly>.
The telephone does not ring when it receives a voice call. (In energy
saver mode, the telephone may ring one or two times.)
The telephone rings when it receives a voice call if a telephone is
connected.
Sets the number of incoming rings. The telephone will be disconnected
after the specified times.
1TIMES to 99TIMES (2TIMES)
Sets whether the machine switches to the document receive mode after
the connected extension telephone rings for a specified length of time in
the manual receive mode.
The machine switches to document receive mode after the connected
extension telephone rings for a specified time.
Sets the length of time to elapse before the machine switches to the
document receiving.
1SEC to 99SEC (15SEC)
The connected extension telephone keeps ringing until someone
answers the call manually.
Enables/disables remote receiving.
The machine enables remote receiving.
You can dial code on the remote extension to start receiving a document.
A combination of two characters using 0 to 9,
default character is 25.
The machine disables remote receiving.
Receives images at a reduced size.
and # is possible. The
Menu Descriptions 8-5
8