Xerox Document Centre 460 Quick Install Manual page 16

UNIX (Solaris/SunOS) (HP-UX)(AIX) Quick Install Card
Xerox Document Centre 460/470 ST
6.
Set the Subnet Mask and Gateway
a)
Press the Subnet and Gateway
button.
b)
Press the soft buttons on the Touch
Screen one at a time and enter the
numbers from the keypad for the
Gateway IP address. When finished
press Save to record the changes and
exit to the TCP/IP Settings screen.
c)
Press the TCP/IP - Line Printer
button. At the next screen press the
Enable button.
NOTE: While you can change the port num-
ber at which your Document Centre
will accept lpr print jobs it is recom-
mended that you do this ONLY with
extreme caution as most lpr spoolers
are set to send print jobs to the default
port.
d)
If you wish to change the lpr port for
your printer press the port soft button
and enter the desired port number at
the keypad. Press Save.
For assistance, contact your local Xerox Customer Support Center:
USA: 1-800-821-2797 Canada: 1-800-939-3769
7.
Press the Exit Tools button.
8.
Prepare for print driver installtion
a)
From the documentation package
supplied with your printer, retrieve the
CentreWare Network Services CD-
ROM and the document entitled
Network Services Guide. Proceed to
the next section of this procedure
called Go to a Workstation and...
Page 2
Go to a workstation and...
1.
Mount the CentreWare Network Ser-
vices CD-ROM and load the DCPR Tool.
Details for these procedures are contained
in the document entitled Network Ser-
vices Guide.
2.
Add the printers host name, TCP/IP
address, hardware address to your /etc/
hosts file or NIS database depending on
your UNIX version.
3.
Create a queue using the CentreWare tool
OR by using the native tools available in
your operating system version.
4.
Create a print job and send it to the printer.
5.
Check your test job for quality and use the
problem solving section of the Document
Centre 460/470 Reference Guide for
resolving print defects.
6.
If your job does not print, refer to the trou-
bleshooting section in the document enti-
tled Network Installation and
Troubleshooting Guide to correct the
problem.
7.
Repeat this Go to a workstation and...
procedure at each workstation that will
print to this printer.