Xerox Document Centre 460 Quick Install Manual page 14

Novell NetWare 4.X and 5.X NDS Quick Install Card
Xerox Document Centre 460/470 ST
c)
Press the Directory Service Tree
button and enter the NDS tree name
where the Context chosen in the
previous step resides. Be sure to
press Save when you have finished.
6.
Set the Print Server Name and Password.
a)
Press the Print Server button.
b)
Press the Print Server Name button
and use the Touch Screen keyboard to
enter the name you assigned to your
print server (it is recommended you
use all UPPER CASE characters). A
default name will appear. Use the
backspace key (it looks like an arrow
pointing to the left) to clear out the
default name prior to entering your
new name. When finished press Save
to retain the changes and return to the
Print Server screen.
c)
Press the Print Server Password
button and use the touch screen
keyboard to enter the print server
password you recorded when you set
up your print server then press Save.
d)
Press Save to exit the Print Server
screen and save your changes.
For assistance, contact your local Xerox Customer Support Center:
USA: 1-800-821-2797 Canada: 1-800-939-3769
7.
OPTIONAL STEP: Change the desired
SAP rate or Poll Interval for your printer
a)
Press the Rates button.
b)
Press the box under SAP Rate or Poll
Interval and enter the desired number
from the keypad. The default values
are recommended. When finished,
press Save to retain your changes and
return to the NetWare Options screen.
8.
Exit the Tools Menu
a)
Press the Exit Tools button.
9.
Prepare for print driver installation
a)
From the documentation package
supplied with your printer, retrieve the
CentreWare Network Services CD-
ROM and the document entitled
CentreWare Network Services
Guide. Proceed to the next section of
this procedure called Go to a
Workstation and...
Page 2
Go to a workstation and...
1.
Use the CentreWare Network Services
CD-ROM to install print drivers on a Win-
dows-based workstation. Details for this
are found in the document supplied with
your printer entitled CentreWare Network
Services Guide.
2.
Connect the print driver you loaded above
to the queue you created on the NetWare
server.
3.
Open an application and print a test job.
4.
Check your test job for quality and use the
problem solving section of the Document
Centre 460/470 Reference Guide for
resolving print defects.
5.
If your test job does not print, refer to the
troubleshooting section in the document
entitled Network Installation and
Troubleshooting Guide to correct the
problem.
6.
Repeat this Go to a workstation and...
procedure at each workstation that will
print to this printer.