Xerox Document Centre 460 Quick Install Manual page 13

Novell NetWare 4.X and 5.X NDS Quick Install Card
Xerox Document Centre 460/470 ST
Before You Start
To enable 100BaseT or a Token Ring interface,
refer to the 100BaseT Ethernet and Token
Ring Interface Quick Install Card to configure
the Speed and Source Routing settings for your
environment. Then return to this card.
NOTE: If you wish to connect your Document
Centre using NDPS, you may download the
Xerox Agent and printer drivers from
www.xerox.com.
The CentreWare software supplied with your
printer can be used to set up your printer on your
Novell network. Refer to the document entitled
Network Services Guide. This procedure
assumes you ran NWADMIN or PCONSOLE to
set up a print server object. Please refer to the
documentation supplied by Novell to complete
this task. Record precisely (Observe upper and
lower case, dot notation etc.) the following:
NDS Tree _____________________________
NDS Context Name ______________________
Print Server Name _______________________
Print Server password ____________________
Additionally, you must set NCP Packet Signa-
ture option to 0,1, or 2 (3 is not supported), AND
set Reply to get nearest server to ON for at
least one file server that is on the same seg-
ment as the printer.
NOTE: ALL Print Servers you create must have
a password. When your printer will service
queues on multiple fileservers, the Print Server
name must be the same on all fileservers and
the Print Server password must be the same on
all fileservers.
Go to the printer and...
1.
Connect your Document Centre to the net-
work with the appropriate cabling.
2.
Enter the Tools pathway.
a)
Press the Access ( ) button.
b)
On the keypad enter 1111 or the
current password. Press the Enter
button when finished. Press the Go to
Tools button.
c)
The Touch Screen will be used for the
remainder of the data entry.
3.
Enable the Network Protocol
a)
Press the Connectivity and Network
Setup button.
b)
Wait for the screen to refresh and
press the Network Setup button.
c)
Press the NetWare button.
d)
Wait for the screen to refresh and
press the Protocol and Media button.
Page 1
e)
Press the Enable button. If Physical
Media buttons appear, select either
Ethernet or Token Ring. Press Save.
4.
Set the Frame Type
a)
Press the Frame Type button.
b)
Select the frame type desired then
press Save to retain your changes and
exit to the NetWare Options screen.
5.
Set the NDS Settings
a)
Press the NDS Settings button.
Novell suggests using typeful names
when entering Name Context and
Directory Service Tree information.
TYPEFUL NAME EXAMPLE:
cn=contextname.ou=organization.o=company.c=country
b)
At this screen press the Name
Context button and use the touch
panel keyboard to enter the context in
which this printer resides. To access
numeric characters and punctuation,
press the More Characters button.
When finished press Save.