Receiving Faxes Manually; Receive A Fax By Polling - Epson WorkForce Pro WP-4515 User Manual

WP-4511/4515/4521/4525/4530/4531/4535/4540/4545/4590/4595

Receiving faxes manually

If your phone is connected to the product, and Auto Answer mode has been set to Off, you can receive fax data after the
connection is made.
Note:
❏ Depending on the Fax Output settings, the received fax is saved as data or printed.
"Changing Fax Output setting to print" on page 110
&
❏ If Fax Output is set to Save, the received fax data is automatically saved as data, and you can skip step 1.
A
Load A4-size plain paper.
"Loading Paper" on page 27
&
B
When the telephone rings, lift the phone connected to the product.
C
Select Receive.
D
Press one of the x Start buttons to receive the fax, and then put the phone back on the hook.
Note:
If Fax Output is set to Save, the received fax data is automatically saved as data, and you do not have to proceed to
step 5.
E
Press one of the x Start buttons to print your faxes.

Receive a fax by polling

This allows you to receive a fax from the fax information service you have called.
Note:
❏ Depending on the Fax Output settings, the received fax is saved as a data or printed.
"Changing Fax Output setting to print" on page 110
&
❏ If Fax Output is set to Save, the received fax data is automatically saved as data, and you can skip step 1.
Follow the instructions below to receive a fax by polling. Use the l, r, u, or d buttons to change the LCD screen view to
find the menu, setting item, or option you want to enter.
A
Load A4-size plain paper.
"Loading Paper" on page 27
&
User's Guide
Faxing
118