Note: If you run out of paper during fax printing, load more paper and press the button indicated on your
product's LCD screen to continue.
Parent topic:
Receiving Faxes Automatically
To receive faxes automatically, make sure Receive Mode is set to Auto (the default setting for the
product).
To change the Receive Mode if necessary, select Settings > Fax Settings > Basic Settings >
Receive Mode.
If an answering machine is connected, make sure the product's Rings to Answer setting is set higher
than the number of rings your answering machine is set to answer a call. For example, if the answering
machine is set to pick up on the fourth ring, set the product to pick up on the fifth ring or later.
Parent topic:
Related tasks
Receiving Faxes Manually
Receiving Faxes Manually
You can set up your product to receive faxes manually by setting the Receive Mode to Manual. This lets
you check for a fax tone on the connected telephone before receiving a fax.
1. To change the Receive Mode setting, from the home screen, select Settings > Fax Settings >
Basic Settings > Receive Mode and select Manual.
2. When the connected telephone rings, answer the call.
3. If you hear a fax tone, select Fax on the LCD display.
Note: To receive a fax using the attached telephone instead of the product control panel, enable the
Fax Settings > Basic Settings > Remote Receive setting.
4. Press the # button.
5. Press the
6. Hang up the telephone.
Parent topic:
Receiving Faxes
Receiving Faxes
start button to start receiving the fax.
Receiving Faxes
177