Epson WorkForce Pro WP-4592 Instruction

WorkForce Pro WP-4592
®
Start Here
Read these instructions before using your product.
1
Unpack
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all tape and protective materials, including the foam and
plastic inside the printer.
2
Turn on
1
Connect the power cord to the back of the printer and to
an electrical outlet.
Caution: Do not connect to a computer yet.
2
Press the power button.
3
Select settings
1
Spanish is the default language of the LCD control panel.
To select it, press OK.
To choose English, use the arrow buttons to select it
and press OK.
2
Select your country and press OK.
3
Select Summer if Daylight Saving Time is in effect
(spring through summer); otherwise, select Winter.
Press OK.
4
Select the date format and press OK.
5
Use the numeric keypad to set the date and press OK.
6
Select 12h ( / ) or 24h and press OK.
AM PM
7
Use the numeric keypad to set the time and press OK.
Note: You can change the date and time settings by pressing
Configurar, selecting Printer Setup, then selecting Date/Time.
4
Install ink cartridges
Caution: Keep ink cartridges out of the reach of children and don't
drink the ink.
1
Open the front cover.
2
Unpack the four ink cartridges.
3
Shake each cartridge as shown for about 5 seconds.
4
Install each cartridge in the correct slot for its color. Push
each cartridge in until it clicks.