Multiple Pages Feed; Paper Is Improperly Loaded; Paper Is Not Ejected Fully Or Is Wrinkled - Epson WorkForce Pro WP-4515 User Manual

Faster than a laser; half the cost
Hide thumbs Also See for WorkForce Pro WP-4515:
Table of Contents

Advertisement

WP-4511/4515/4521/4525/4530/4531/4535/4540/4545/4590/4595
❏ Paper is not jammed inside the printer. If it is, remove the jammed paper.
"The Paper Jams" on page 164
&
❏ The ink cartridges are not expended. If a cartridge is expended, replace it.
"Replacing an ink cartridge" on page 140
&
❏ You have followed any special loading instructions that came with your paper.
❏ The paper does not have any binder holes.

Multiple pages feed

❏ For plain paper, do not load paper above the line just under the H or c arrow mark inside the edge guide.
For Epson special media, make sure the number of sheets is less than the limit specified for the media.
"Selecting which tray to use and its loading capacities" on page 25
&
❏ Make sure the edge guides are snug against the edges of the paper.
❏ Make sure the paper is not curled or folded. If so, flatten it or curl it slightly toward the opposite side before
loading.
❏ Remove the stack of paper and make sure that the paper is not too thin.
"Paper" on page 195
&
❏ Fan the edges of the stack to separate the sheets, then reload the paper.
❏ If too many copies of a file are being printed, check the Copies setting in your printer driver as follows, and also
check in your application.
For Windows, check the Copies setting on the Main window.
For Mac OS X 10.4, check the Copies setting in the Copies & Pages setting in the Print dialog.
For Mac OS X 10.5 or later, check the Copies setting in the Print dialog.

Paper is improperly loaded

If you have loaded the paper too far into the printer, the printer cannot feed the paper correctly. Turn the printer off
and gently remove the paper. Then turn the printer on and reload the paper correctly.

Paper is not ejected fully or is wrinkled

❏ If the paper does not eject fully, press one of the x Start buttons to eject the paper. If the paper is jammed inside the
printer, remove it by referring to the following section.
"The Paper Jams" on page 164
&
❏ If the paper is wrinkled when it comes out, it may be damp or too thin. Load a new stack of paper.
Note:
Store any unused paper in its original packaging in a dry area.
Troubleshooting for Printing
177
User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents