Figure 5 Show Interfaces Fastethernet Statistics - Nortel 8300 Series Maintenance Manual

36 Routine software maintenance
show interfaces stats command
Use this command in the Privileged EXEC mode to display relevant
interface error information.
The command uses the syntax:
show interfaces <interface> statistics
where <interface> is the interface type:
•
•
Figure 5 "show interfaces FastEthernet statistics" (page 36)
sample output for the show interfaces <interface> statistics
command.
Figure 5
show interfaces FastEthernet statistics
Monitoring port statistics
To set the monitor statistics duration and interval, use the following
command in the Global Config mode:
ERS-8310:5 <config># monitor-stats
Copyright © 2004-2007, Nortel Networks
.
FastEthernet
GigabitEthernet
Nortel Ethernet Routing Switch 8300 Series
Routine Maintenance
NN46200-514 03.01 Standard
4.0 27 August 2007
shows