Nortel 8300 Series Maintenance Manual page 29

2
3
4
Copyright © 2004-2007, Nortel Networks
.
Removing modules and cleaning slots and the backplane 29
CAUTION
Do not operate the Nortel Ethernet Routing Switch 8300
Series with an empty module slot. If you need to replace
a failed module and you do not yet have a replacement
module, leave the failed module installed or install a filler
panel.
Using a Phillips screwdriver, loosen the 2 captive screws that secure
the module to the chassis
8010, 8306, and 8310 Chassis" (page 29)
Loosening screws on the module: 8006, 8010, 8306, and 8310 Chassis
Rotate the insert/extract levers to eject the module from the chassis
("Ejecting the module from the chassis: 8006, 8010, 8306, and 8310
Chassis" (page 29)).
Ejecting the module from the chassis: 8006, 8010, 8306, and 8310
Chassis
Slide the module out of the chassis
8010, 8306, and 8310 Chassis" (page
Nortel Ethernet Routing Switch 8300 Series
Routine Maintenance
NN46200-514 03.01 Standard
4.0 27 August 2007
("Loosening screws on the module: 8006,
).
("Removing a module: 8006,
30)).