Remote Control; General; Maintenance; Cleaning - Dynex DX-32L100A11 User Manual

28
DX-32L100A11
Problem
Audio noise.

Remote control

Problem
Remote control does not
work.
Trouble programming your
existing universal remote
control.
Solution
• Make sure that there is no
interference with infrared
equipment such as a cordless
telephone or headphones. Move
the infrared equipment away
from the TV to eliminate the
noise.
Solution
• Make sure that the power cord is
plugged in.
• Make sure that there are no
obstructions between the remote
control and the remote control
sensor on the front of the TV.
• Make sure that the batteries are
installed correctly. For more
information, see "Installing
remote control batteries" on
page 7.
• Replace the batteries. For more
information, see "Installing
remote control batteries" on
page 7.
• See instructions and a table of
common codes in "Programming
a universal remote control to
work with your TV" on page 7.
• Codes are subject to change. For
up to date codes, go to
www.dynexproducts.com.
• Replace the batteries. For more
information, see "Installing
remote control batteries" on
page 7.
• Refer to the User Guide that
accompanied your universal
remote control and contact the
manufacturer if problems persist.

General

Problem
One or more channels do
not display.
Password is lost.
Some settings cannot be
accessed.
TV cabinet creaks.
Control buttons on the TV
do not work.
Note: If the problem is not solved by using these troubleshooting
instructions, try turning off your TV, then turning it on again.

Maintenance

Cleaning

• Clean your TV with a soft, dry cloth. If surfaces are extremely
dirty, use a soft cloth dampened with a weak detergent solution.
• Use an eyeglass cleaner to clean the screen. Never use alcohol,
paint thinner, or benzine.
• Before using a chemically treated cloth, read the instructions that
came with the cloth.
Maintenance
Solution
• Make sure that the channels are
not blocked. For more
information, see "Setting parental
control levels" on page 20.
• Make sure that the channels are
not hidden. For more information,
see "Hiding channels" on page 17.
• The channel may have been
deleted from the channel list. You
can tune to the channel by
pressing the number buttons or
you can add the channel back to
the channel list. For more
information, see "Changing
channel settings" on page 16.
• Enter 9999 to access parental
controls, then set a new
password. For more information,
see "Setting parental controls" on
page 18.
• If a setting is grayed, the setting is
not available in the current video
input mode.
• When the TV is in use, the
temperature rises naturally and
may cause the cabinet to expand
or contract which can cause a
creaking noise. This is not a
malfunction.
• Disconnect the power cord, wait a
few seconds, then reconnect the
power cord and turn on the TV.