Adjusting The Picture; Adjusting The Tv Picture; Adjusting The Computer Image - Dynex DX-32L100A11 User Manual

14
DX-32L100A11

Adjusting the picture

Adjusting the TV picture

To adjust the picture:
1 Press MENU. The on-screen menu opens with the Picture menu
displayed.
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Move
2 Press or to highlight an option, then press or to adjust
the option. You can select:
• Picture Mode—Selects the picture mode. You can select:
• Vivid (a bright and vivid picture)
• Standard (a standard picture)
• Sports (a dynamic picture)
• Theater (a finely detailed picture)
• Energy Saving (the backlight brightness is decreased)
• Custom (customized picture).
Note: You can also press PICTURE on the remote control to
select the picture mode.
• Contrast—Adjusts the contrast.
• Brightness—Adjusts the brightness.
• Color—Adjusts the color saturation.
• Tint—Adjusts the image tint.
• Sharpness—Adjusts the sharpness.
• Backlight—Adjusts the screen backlight.
3 Press or to highlight Advanced Video, then press ENTER
to enter the sub-menu.
4 Press or to highlight an option, then press or to adjust
the option. You can select:
• Color Temperature—Selects the color temperature. You
can select Warm (to enhance the reds), Cool (to enhance
the blues), or Normal.
• Zoom Mode— Selects the aspect ratio of the picture. You
can select:
• Auto (selects the correct aspect ratio automatically.
Available only when Auto Zoom is turned ON).
• Normal (selects the correct aspect ratio to match the
source image).
• Wide (shows a full-screen picture).
• Zoom (enlarges the picture but may crop the top and
bottom).
• Cinema (stretches the picture at the edges, but
maintains a good aspect ratio at the center of the
screen).
Notes:
• The above aspect ratios are all available only when Overscan is
turned ON when watching a digital program.
• You can also press ZOOM on the remote control to select the aspect
ratio of the picture.
Picture Audio Setup Channel
Custom
70
40
60
0
50
30
Select Exit
MENU
• Noise Reduction—Selects the noise reduction mode to
reduce picture noise (snow). You can select Weak, Middle,
Strong, or Off.
• Overscan—Turn this On to adjust the picture's
reproduction rate.
• Adaptive Contrast—Turn this On to optimize the picture
display for a more vivid image.
• DCR—Turn this On to activate the Dynamic Backlight
Control function. Depending on the signal, the TV
automatically adjusts the backlight level, which affects the
overall brilliance of the picture.
• Auto Zoom—In TV mode, setting Auto Zoom to On lets you
set the Zoom Mode to Auto.
5 Press MENU to return to the previous menu, or press EXIT to
close the menu.

Adjusting the computer image

To adjust the computer image:
1 Make sure that your TV is in VGA mode. For more information, see
"Selecting the video input source" on page 12.
2 Press MENU. The on-screen menu opens.
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Move
3 Press or to highlight Setup, then press . The Setup menu
opens.
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Move
Adjusting the picture
Picture Audio Setup Channel
Custom
70
40
60
0
50
30
Select
Exit
MENU
Picture Audio Setup Channel
Off
Select
MENU Exit