Remote Control - Dynex DX-32L100A11 User Manual

6
DX-32L100A11
Item Name Description
COMPONENT IN Connect component video devices to these
9 jacks jacks. For more information, see "Connecting
a component video device" on page 8.
AUDIO OUT jacks Connect an audio amplifier to these jacks.
10 For more information, see "Connecting a
home theater system" on page 10.
ANT/CABLE IN Connect an antenna or cable TV to this jack.
jack For more information, see "Connecting an
11
antenna, cable TV, or satellite TV box" on
page 9.

Remote control

Item Name Description
Press to turn on the TV or put the TV in standby
POWER
mode.
1
Caution: The TV continues to receive power
even in standby mode. Unplug the power cord
to disconnect power.
COMP Press to select the device connected to the
2
COMPONENT IN jacks
Item Name Description
HDMI Press once to select a device connected to the
HDMI 1 jack.
3
Press twice to select a device connected to the
HDMI 2 jack.
Numbers/. Press the number buttons to enter channel
numbers or the parental control password.
Press the dot button to select a digital
4
sub-channel.
For more information, see "Selecting a channel"
on page 12.
INPUT Press to open the INPUT SOURCE menu. For
more information, see "Selecting the video
5
input source" on page 12.
VOL+ / VOL– Press to increase or decrease the volume.
6
MENU Press to open the on-screen menu.
7
Press or
menus.
8
Press or
menus or to adjust menu settings.
ENTER Press to confirm selections in on-screen menus
9
or to open sub-menus.
GUIDE Press to open the DTV program guide (if
10 available). For more information, see
"Displaying program information" on page 12.
MTS/SAP In analog TV mode, press to select STEREO,
SAP (secondary audio language), or MONO.
11
In digital TV mode (DTV), press to select the
audio track. For more information, see
"Selecting the audio mode" on page 15.
CCD Press to turn closed captioning on or off. For
12 more information, see "Turning closed
captioning on or off" on page 22.
ZOOM Press to select the screen aspect ratio. You can
select Auto, Normal, Zoom, Wide, and
13
Cinema. For more information, see "Adjusting
the TV picture" on page 14.
FAVORITE Press to open the favorite channel list. For more
14
information, see "Setting up a favorite channel
list" on page 17.
VIDEO Press to select the device connected to the AV
15
IN Jack.
TV Press to select the TV as the video input source.
16 For more information, see "Selecting the video
input source" on page 12.
RECALL Press to go to the last viewed channel. For more
17 information, see "Selecting a channel" on page
12.
Press to go to the next or previous channel in
CH /CH
the channel list. For more information, see
18
"Automatically scanning for channels" on
page 16 and "Selecting a channel" on page 12.
MUTE Press to mute the sound. Press again to restore
19
the sound.
INFO Press to display the information banner. For
20 more information, see "Displaying program
information" on page 12.
EXIT Press to close the on-screen menu.
21
SLEEP Press to set the sleep timer. For more
22
information, see "Setting the sleep timer" on
page 25.
TV components
to move up or down in on-screen
to move left or right in on-screen