Selecting The Video Input Source; Selecting A Channel; Adjusting The Volume; Displaying Program Information - Dynex DX-32L100A11 User Manual

12
DX-32L100A11

Selecting the video input source

To select the video input source:
1 Turn on your TV, then press the INPUT key on the remote, or the
INPUT button on the TV. The INPUT SOURCE menu opens.
INPUT SOURCE
Component
HDMI1
HDMI2
2 Press or to highlight the video source, then press ENTER.
You can also select the input source using the following remote
control buttons:
• VIDEO—Press switch to AV input.
• HDMI–Press repeatedly to cycle between HDMI inputs.
• TV—Press to switch to TV mode.
• COMP—Press to switch to Component input.

Selecting a channel

To select a channel:
• Press CH / CH
• Press the number buttons to enter the channel number you want,
then wait for the channel to change, or press ENTER to change
the channel immediately.
• To select a digital channel, press the number buttons to
select the main digital channel, then press the dot (.) button,
then the number buttons again to select the sub-channel.
Wait for the channel to change or press ENTER to change the
channel.
Note: Button presses must be within three seconds of each other.
• Press RECALL to go to the last channel viewed.
• Press CH-LIST to display a list of memorized channels, press or
to select the channel you want from the list, then press ENTER
to go to that channel.
• Press FAVORITE to display a list of your saved favorite channels,
press or to select the channel you want from the list, then
press ENTER to go to that channel.
Note: If the list has more than one page, press
the pages.

Adjusting the volume

To adjust the volume:
• Press VOL+ or VOL– to increase or decrease the volume.
• Press MUTE to temporarily turn off all sound. Press MUTE again
to restore the sound.

Displaying program information

To display program information:
• Press INFO to show an information banner. The information
banner shows current program information such as channel
number, video input source, and resolution.
TV
AV
VGA
to go to the next or previous channel.
or to scroll through
• Digital signal information—Displays channel number,
station name, channel label (if preset), broadcast program
name, TV rating, signal type, audio information, resolution,
CC mode, current time, and current program start and end
times when watching a digital channel.
• Analog signal information—Displays channel number,
channel label (if preset), signal type, audio information, and
resolution when watching an analog channel.
• Press GUIDE to show the digital program guide, which may show
a list of available programs, program times, and program
summaries, depending on the information provided by the
broadcaster.

On-screen menu overview

Picture menu
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Move
Audio menu
Sound Mode
Bass
Treble
Balance
Surround
AVC
Digital Output
Audio Language
Move
Setup menu
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Move
Understanding the basics
Picture Audio Setup Channel
Custom
70
40
60
0
50
30
Select Exit
MENU
Picture Audio Setup Channel
Custom
57
50
0
Off
Off
RA W
English
Select
Exit
MENU
Picture Audio Setup Channel
Off
Select Exit
MENU