Using The Remote Control; Installing Remote Control Batteries; Aiming The Remote Control; Programming A Universal Remote Control To Work With Your Tv - Dynex DX-32L100A11 User Manual

Using the remote control

Item Name Description
CH-LIST Press to open the channel list. For more
23 information see "Selecting a channel" on
page 12.
PICTURE Press to select the picture mode. You can select
Vivid, Standard, Theater, Sports, Energy
24
Saving, and Custom. For more information, see
"Adjusting the TV picture" on page 14.
AUDIO Press to select the sound mode. You can select
Standard, Movie, Music, News, or Custom. For
25
more information, see "Adjusting the sound" on
page 15.
Using the remote control

Installing remote control batteries

To install remote control batteries:
1 Press down on the battery compartment cover lock, then remove
the remote control cover.
2 Insert two AAA batteries into the battery compartment. Make
sure that the + and – symbols on the batteries match the +
and – symbols in the battery compartment.
3 Replace the cover. Make sure that the lock snaps into place.
Battery precautions:
• Dispose of batteries as hazardous waste.
• Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can
shorten the life of new batteries and can cause old batteries to leak.
• Remove batteries as soon as they become inoperable. Chemicals that
can leak from the batteries can cause a rash. If the batteries leak,
clean the battery compartment with a cloth.
• If the remote control is not used for an extended period of time,
remove the batteries.
• Do not expose batteries to excessive heat such as sunshine, fire, or
other heat sources.

Aiming the remote control

To aim the remote control:
• Point the remote control towards the remote sensor on the front
of your TV.
16.4 ft. (5m)
Notes:
• Do not expose the remote control to shock or liquids.
• Do not use the remote control in an area with high humidity.
• Do not place the remote control in direct sunlight.
• Do not place objects, such as furniture, between the remote control
and the remote sensor.
• The remote control may not work if direct sunlight or bright light
shines on the remote sensor. Either move your TV or change the angle
at which you use the remote control.
Programming a universal remote control
to work with your TV
You can operate your TV with a new or existing universal remote
control.
To program your existing universal remote control:
1 To program your existing remote control to work with your Dynex
TV, see the table below for common codes. If you have problems
programming your remote, or need a different remote control
code, visit www.dynexproducts.com for the latest remote control
code information.
Dynex TV codes for universal remote controls
(for all Dynex TVs manufactured after Jan. 1, 2007)
Universal remote control manufacturer and model
Philips RCA One for All
PHDVD5,
RCU807 URC-6690
PH5DSS,
PMDVR8,
PDVR8
115 135
Set-top box manufacturer and model
Comcast Dish Motorola
Network
M1057 DRC800
VIP508,
VIP622
0463 720
DX-32L100A11
Sony
RM-VL600
0464 8043
TIVO DirectTV
Series 3, HD RC23
0463 0091 10463
7