Setting The Network Setup On The Projector - Sony VPL-TX70 Operating Instructions Manual

Error: Check this check box to arrange on
sending of an error report if any problem
occurs with the projector.
Click on "Apply." The setting will be
completed.
Notes
• If the following items have not been set or are
incorrectly set and the test e-mail message is
disabled:
– Address in the Address field.
– "Mail Address" and "Outgoing Mail
Server (SMTP)" in the Mail Account field.
For details on the mail settings, consult your
network administrator.
• You cannot use the following characters
when entering the characters in the text box:
" ' ", " " ", " \ ", " & ", " < ", " > "
E-mail Account
User Name: Enter the assigned User Name.
You can enter up to 64 characters.
Password: Enter your mail password.
SMTP Server: Set up the mail server's
address. You can enter up to 64
characters.
Send Test Mail: Check this check box, then
click on "Apply" to send an e-mail
message as a test to confirm that it is sent
to the specified addresses.
Click on "Apply." The setting will be
completed.
46

Setting the Network Setup on the Projector

Setting the Network
Setup on the
Projector
If you select "Network Setting" on the SET
SETTING menu, you can modify the items
from the network settings screen.
SET SETTING
N e t wo r k S e t t i n g
D H C P : O f f
I P A dd r e s s : 1 9 2 . 1 6 8 . 0 0 0 . 1 0 1
S u b n e t M a s k : 2 5 5 . 2 5 5 . 2 5 5 . 0 0 0
D e f a u l t G a t ew ay : 1 9 2 . 1 6 8 . 0 0 0 . 2 5 4
D N S S e r v e r : 1 9 2 . 1 6 8 . 0 0 0 . 0 0 1
M AC A dd r e s s : 0 0 - 1 1 - 2 2 - A A - E E - F F
A p p ly
DHCP On: Select this to set the network
settings automatically. The values for
the items are displayed below on the
screen.
DHCP Off: Select this to set the network
settings manually. Select each item and
enter the information for the network
settings.
For each item you select, an entry screen will
appear.
Display example: IP address setting
I P Ad dres s: 1 9 2 . 1 6 8 . 0 0 0 . 1 0 1
Press the b or B key to move the cursor then
press the v or V key to enter the value.
When you finish entering information, press
the ENTER key and go back to the SET
SETTING menu.
Enter the required information for each
network setting as well.
When you finish all settings, click on
"Apply" at the bottom.
The message "Complete!" will appear, and
the settings will be in effect.
Note
When DHCP is On, these settings are disabled.
Input-B