Connector Panel - Sony VPL-TX70 Operating Instructions Manual

Connector Panel

a VIDEO IN connector
• S VIDEO (mini DIN 4-pin):
Connects to the S video output of
video equipment.
• VIDEO (phono type):
Connects to the video output of video
equipment.
b AUDIO INPUT connector
Inputs audio signal attached to the image
from INPUT A, INPUT B or VIDEO.
c INPUT A connector
RGB (HD D-sub 15-pin, female):
Inputs a computer signal, video GBR
signal, component signal, or DTV signal
depending on the connected equipment.
Connects to the output connector of
equipment using the supplied cable or an
optional cable.
For details, see "Connecting a
Computer" on page 19 and
"Connecting a VCR" on page 20.
d INPUT B connector
RGB connector (HD D-sub 15-pin,
female):
1 2 3 4 5 6 7
Inputs a computer signal.
Connects to the output connector of
equipment using the supplied cable or an
optional cable.
e NETWORK connector (RJ-45)
Connects to a computer connector
through which to operate the projector
via a network.
CAUTION
For safety, do not connect the connector
for peripheral device wiring that might
have excessive voltage to this port.
Follow the instructions for this port.
f OUTPUT connector
• MONITOR (HD D-sub 15-pin
female):
Connects to the input connector of the
monitor. Only the computer signal on
the current channel is output from
among the signals connected to
INPUT A or INPUT B.
• AUDIO (stereo minijack):
Connects to the active speaker. Adjust
the volume with VOLUME +/– on the
remote commander.
Location and Function of Controls
15