Setting The Lan Network Of The Projector - Sony VPL-DX147 Operating Instructions Manual

Requires the use of POP
Authentication before sending email
(POP before SMTP): Check this
check box to arrange for POP
authentication to be performed before
sending e-mail.
Incoming Mail Server (POP3): Enter
the address of the incoming-mail
server (POP3) to be used for POP
authentication.
Account Name: Enter the mail account
name.
Password: Enter the password.
SMTP Authentication: Check this
check box to arrange for SMTP
authentication to be performed before
sending e-mail.
Account Name: Enter the mail account
name.
Password: Enter the password.
5
Confirm the contents of the e-mail
report.
When you click on [View], the contents
of the e-mail report are displayed.
6
Send the test mail.
Check on the Send test mail check box
then click on [Apply] to send your test
mail to the e-mail address you set.
Notes
• The email report function will not work if the
network uses Outbound Port25 blocking,
which prevents access to the SMTP server.
• You cannot use the following characters to
enter the characters in the text box: " ' ",
\
" " ", " ", " & ", " < ", " > "
32
Using Network Features
Setting the LAN Network of
the projector
Set the LAN network function on the Setup
page.
Entered values will not be applied unless
you click on [Apply].
1
Click on [Network] to open the
Network page.
Network button
2
Set the items for internet protocol.
Obtain an IP address automatically:
Automatically provides the network
settings by a DHCP server function,
such as the router. The IP Address,
Subnet Mask, Default Gateway,
Primary DNS, and Secondary DNS
display the values provided by a
DHCP server.
Specify an IP address: Set the network
manually.
-IP Address: Input the IP address of the
projector.
-Subnet Mask: Input the subnet mask of
the projector.
-Default Gateway: Input the default
gateway of the projector.
-Primary DNS: Input the primary DNS
server of the projector.
-Secondary DNS: Input the secondary
DNS server of the projector.
3
Set the items for Ethenet.
MAC Address: Displays the MAC
address of the projector.
LAN Network
setting area