The Install Setting Menu - Sony VPL-TX70 Operating Instructions Manual

The INSTALL SETTING Menu

The INSTALL SETTING menu is used for changing the settings of the projector.
INSTALL SETTING
V Key s t o n e :
I m ag e F l i p :
B a ck g ro u n d :
L a m p M o d e :
High Altitude Mode: O f f
S e c u r i t y L o ck :
D i r e c t Pow e r O n : O f f
E x t e r n a l C o n t ro l :
Setting items
V Keystone
(VPL-TX70
only)
V Keystone
(VPL-TX7 only)
Image Flip
Background
Lamp Mode
High Altitude
Mode
Security Lock
Direct Power On Set to "On" if you are using a circuit breaker to turn the
38
The INSTALL SETTING Menu
Input-A
Au t o
O f f
B l u e
S t a n d a rd
O f f
Functions
Corrects the trapezoidal distortion caused by the projection
angle. Select "Auto" for automatic correction, or "Manual"
for manual correction using the v/V/b/B keys.
When the bottom of the trapezoid is longer than the top
: Sets a lower value.
When the top of the trapezoid is longer than the bottom
: Sets a higher value.
Corrects the trapezoidal distortion caused by the projection
angle using the v/V/b/B keys on the Remote Commander.
When the bottom of the trapezoid is longer than the top
: Sets a lower value.
When the top of the trapezoid is longer than the bottom
: Sets a higher value.
Flips the image on the screen horizontally and/or vertically.
• HV: Flips the image horizontally and vertically.
• H: Flips the image horizontally.
• V: Flips the image vertically.
• Off: The image does not flip.
Selects the background color of the screen when no signal
is input to the projector. Select "Black" or "Blue."
Normally, set to "Blue."
Sets the lamp brightness used during the projection.
• High: Illuminates the projected image brightly.
• Standard: Reduces fan noise and power consumption.
The brightness of the projected image will be lower
compared with the "High" setting.
Set to "On" when the projector is used at an altitude of
1,500 m or higher.
Turns on the projector's security lock function.
When set to "On," turns on the security lock function,
which locks the projector once a password has been set.
For details, see "Security Lock" on page 26.
power on/off the entire system. You can turn the power on/
off without pressing the power key on the projector.
Initial setting
Auto
0
Off
Blue
Standard
Off
Off
Off