Setting The Lan Network Of The Projector; Setting The Wlan Network Of The Projector - Sony VPL-EW575 Operating Instructions Manual

Requires the use of POP
Authentication before sending email
(POP before SMTP): Check this
check box to arrange for POP
authentication to be performed before
sending e-mail.
Incoming Mail Server (POP3): Enter
the address of the incoming-mail
server (POP3) to be used for POP
authentication.
Account Name: Enter the mail account
name.
Password: Enter the password.
SMTP Authentication: Check this
check box to arrange for SMTP
authentication to be performed before
sending e-mail.
Account Name: Enter the mail account
name.
Password: Enter the password.
5
Confirm the contents of the e-mail
report.
When you click on [View], the contents
of the e-mail report are displayed.
6
Send the test mail.
Check on the Send test mail check box
then click on [Apply] to send your test
mail to the e-mail address you set.
Notes
• The email report function will not work if the
network uses Outbound Port25 blocking,
which prevents access to the SMTP server.
• You cannot use the following characters to
enter the characters in the text box: " ' ", " "
\
", " ", " & ", " < ", " > "
Setting the LAN Network of
the projector
Set the LAN network function on the Setup
page.
Entered values will not be applied unless
you click on [Apply].
1
Click on [Network] to open the
Network page.
Network button
2
Set the items for internet protocol.
Obtain an IP address automatically:
Automatically provides the network
settings by a DHCP server function,
such as the router. The IP Address,
Subnet Mask, Default Gateway,
Primary DNS, and Secondary DNS
display the values provided by a
DHCP server.
Specify an IP address: Set the network
manually.
-IP Address: Input the IP address of the
projector.
-Subnet Mask: Input the subnet mask of
the projector.
-Default Gateway: Input the default
gateway of the projector.
-Primary DNS: Input the primary DNS
server of the projector.
-Secondary DNS: Input the secondary
DNS server of the projector.
3
Set the items for Ethenet.
MAC Address: Displays the MAC
address of the projector.
Speed: Select the network speed of the
projector.
Setting the WLAN Network of
the projector
Set the WLAN network function on the
Setup page.
Entered values will not be applied unless
you click on [Apply].
Using Network Features
LAN Network
setting area
39