Specifications - Sony VPL-TX70 Operating Instructions Manual

Specifications

Optical characteristics
Projection system
3 LCD panels, 1 lens, projection
system
LCD panel 0.63-inch XGA panel, about
2,360,000 pixels (1,024 × 768 ×
3)
Lens 1.2 times zoom lens
f 18.53 to 22.18 mm/F1.65 to 1.93
Lamp 190 W Ultra high pressure lamp
Projected picture size
40 to 300 inches
1)
Light output VPL-TX70: 2,600 lm
VPL-TX7: 2,000 lm
1)
When the Lamp Mode is set to "High"
Throwing distance (When placed on the floor./
Adjuster not stretched, and the V Keystone
function has been done. )
40-inch: 1.1 to 1.4 m
(3.6 to 4.6 feet)
80-inch: 2.3 to 2.8 m
(7.5 to 9.2 feet)
100-inch: 2.9 to 3.5 m
(9.5 to 11.5 feet)
150-inch: 4.4 to 5.2 m
(14.4 to 17.1 feet)
200-inch: 5.8 to 7.0 m
(19.0 to 23.0 feet)
250-inch: 7.3 to 8.8 m
(24.0 to 28.9 feet)
300-inch: 8.8 to 10.5 m
(28.9 to 34.5 feet)
There may be a slight difference between the
actual value and the design value shown above.
Electrical characteristics
Color system NTSC
NTSC
PAL60 system, switched
automatically/manually
(NTSC
when playing back a video
recorded in NTSC on a
NTSC
Resolution 750 horizontal TV lines (Video
input)
1,024 × 768 dots (RGB input)
Acceptable computer signals
fH: 19 to 92 kHz
fV: 48 to 92 Hz
54
Specifications
/PAL/SECAM/
3.58
/PAL-M/PAL-N/
4.43
is the color system used
4.43
system VCR.)
4.43
2)
(Maximum input signal resolution:
SXGA+ 1,400 × 1,050
fV: 60 Hz)
2)
Set the resolution and the frequency of the
signal of the connected computer within the
range of acceptable preset signals of the
projector.
Applicable video signals
15 k RGB/component 50/60 Hz,
Progressive component 50/60
Hz, DTV (480/60i, 575/50i,
480/60p, 575/50p, 720/60p,
720/50p, 1,080/60i, 1,080/50i),
Composite video, Y/C video
Speaker Monaural speaker system, ø35
Speaker output
5 W (max.) × 1
Input/Output
VIDEO IN VIDEO: phono type
Composite video: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
S VIDEO: Y/C mini DIN 4-
pintype
Y (luminance): 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
C (chrominance): burst 0.286
Vp-p ±2 dB (NTSC) (75 ohms
terminated), burst 0.3 Vp-p ±2
dB (PAL) (75 ohms terminated)
INPUT A RGB: HD D-sub15-pin (female)
Analog RGB/component:
R/R-Y: 0.7 Vp-p ±2 dB (75
ohms terminated)
G: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G with sync/Y: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
B/B-Y: 0.7 Vp-p ±2 dB (75
ohms terminated)
HD: Horizontal sync input: TTL
level, positive/negative
VD: Vertical sync input: TTL
level, positive/negative
INPUT B RGB: HD D-sub15-pin (female)
Analog RGB:
R: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G: 0.7 Vp-p ±2 dB (75 ohms
terminated)
B: 0.7 Vp-p ±2 dB (75 ohms
terminated)
HD: Horizontal sync input: TTL
level, Positive/negative