Control Panel; Control Panel Keys And Indicators - Oki OKIOFFICE87 Setup Manual

Control Panel

Control Panel Keys and Indicators

1 LCD Display Panel: Refer to this display for instructions and
information while your MFP machine is performing operations or
while you are programming.
2 key: Use this key to change the resolution used for trans-
YES
mitting documents. Use STD for standard originals, FINE and
EX.FINE for detailed or small print originals, and PHOTO for origi-
nals that include colors or many shades of gray.
Also use this key as
your cursor while programming.
When copying,
once to select the copy resolution.
3 key: Use this key to select the document contrast after you
NO
load a document for transmission. Use LIGHT for originals that are
too light, NORMAL for documents with good contrast, and DARK for
originals that are too dark.
Also use this key as
your cursor while programming.
when making selections or to move
YES
can be used after the copy key is pressed
YES
when making selections or to move
NO
Components 35