Reducing Or Enlarging A Copy - Canon 3743B002 Basic Manual

> Printing Using the Operation Panel of the Machine
Advanced Guide
a Copy

Reducing or Enlarging a Copy

1.
Make sure that the machine is turned on.
2.
Load plain paper on the Rear Tray.
3.
Load the original on the Platen Glass.
4.
Press the Paper button to select A4 or 8.5"x11" Plain Paper.
Note
You can switch the size of paper loaded on the Rear Tray between A4 and Letter.
the Page Size between A4 and Letter
5.
Press the Fit to Page button.
The Fit to Page lamp lights up. To cancel Fit to Page copying, press the Fit to Page button again.
Note
You can use the Fit to Page button only when you are using the copy function.
Copied images are automatically reduced or enlarged in the lengthwise/widthwise direction to
fit the page size you select.
6.
button repeatedly to specify the number of copies.
Press the +
Note
By pressing the + button repeatedly, F will be displayed on the LED. The number of copies will
be set as 20.
When you want to make 10 to 19 copies, specify the number of copies to 20, then load the
same number of pieces of paper. In this case, the machine will stop copying in an error. Press
the Stop/Reset button to release the error.
Pressing the Stop/Reset button returns the number of copies to 1.
7.
Press the Color button for color copying, or the Black button for black & white
copying.
The machine starts Fit to Page copying.
Remove the original on the Platen Glass after copying is complete.
To make high speed copying
1.
Hold down the Color or Black button for longer than 2 seconds.
The LED flashes once.
2.
Release the button.
The machine starts high speed copying.
Important
Do not open the Document Cover or remove the original from the Platen Glass until copying is
complete.
> Copying > Making Copies > Reducing or Enlarging
Switching