Canon 3743B002 Basic Manual page 314

> > Saving Scanned Data to PC Using the Operation Panel of the Machine
Advanced Guide Scanning
Data to PC Using the Operation Panel of the Machine
Saving Scanned Data to PC Using the Operation Panel of the
Machine
You can save scanned data to PC using the Operation Panel of the machine.
Before saving scanned data to PC, confirm the following:
The necessary application software (MP Drivers and MP Navigator EX)
are installed.
If the application software (MP Drivers and MP Navigator EX) are not yet installed, insert the
CD-ROM into the computer's disc drive, then perform Custom Install and select MP Drivers and MP
Navigator EX.
The machine is connected to a computer correctly.
Make sure that the machine is connected to the computer correctly.
Do not plug or unplug the USB cable when scanning images with the machine, or when the
computer is in the sleep or standby mode.
The operation after scanning the original is specified in MP Navigator
EX.
MP Navigator EX enables you to specify the response resulting from pressing the
the machine. You can specify the response individually for each event. For details, refer to
a Response to Commands from the Operation Panel Using MP Navigator EX
1.
Set the starting application.
If you are using Mac OS X v.10.5.x or Mac OS X v.10.4.x:
This operation is not necessary.
If you are using Mac OS X v.10.3.9:
You need to set MP Navigator EX as the starting application software in Image Capture under
Applications of Mac OS X.
Select Applications on the Go menu, then double-click the Image Capture icon. Click Options at the
lower left of the scanner window, select MP Navigator EX 3 in Application to launch when the
scanner button is pressed:, then click OK. To quit Image Capture, select Quit Image Capture on the
Image Capture menu.
Important
If Options is not displayed, select Preferences on the Image Capture menu, click Scanner, and
click Use TWAIN software whenever possible to clear the option. Then quit Image Capture and
restart it.
2.
Make sure that the machine is turned on.
3. Load the original on the Platen Glass.
Note
Refer to
Placing Documents
4.
Press the SCAN button.
The settings configured by MP Navigator EX are applied when scanning.
for how to load the original on the Platen Glass.
> Saving Scanned
Setup
SCAN button on
Selecting
.