Canon 3743B002 Basic Manual page 540

> Printing Photographs Directly from a Compliant Device (MP270 series only)
Advanced Guide
Directly from a Compliant Device (MP270 series only)
About PictBridge Print Settings (MP270 series only)
Settings on a PictBridge Compliant Device
This section describes the PictBridge function of the machine. For the print settings on a
PictBridge compliant device, refer to the instructions given in the device's instruction manual.
Note
In the following description, names of setting items are given according to those used in
Canon-brand PictBridge compliant devices. Setting item names may be different depending
on the brand or model of your device.
Some setting items explained below may not be available on some devices. When you
cannot change print settings on a device, the machine prints images as follows:
Paper size: 4" x 6"/101.6 x 152.4 mm
Paper type: Photo
Bordered/Borderless: Follow camera's setting
Layout: 1-up
Print quality: Standard
Image Optimize: The Photo optimizer pro function will be used for optimized printing.
This section describes the print settings on a PictBridge compliant device. When operating the
device, be sure to follow the instructions given in the device's instruction manual.
Paper size 4" x 6"/10 x 15 cm, 5" x 7"*1, 8" x 10"/ 20 x 25 cm, A4, 8.5" x 11"(Letter), 4" x 7.1"/
10.1 x 18 cm*2
*1 Can be selected only on certain Canon-brand PictBridge compliant devices.
(May not be selected depending on the device.)
*2 Hi Vision may appear on a non-Canon brand PictBridge compliant device.
Paper type Default: Photo Paper Plus Glossy II PP-201
Photo:
Photo Paper Plus Glossy II PP-201/Glossy Photo Paper "Everyday Use" GP-
501/Photo Paper Glossy GP-502/Photo Paper Plus Semi-gloss SG-201
Fast Photo:
Photo Paper Pro II PR-201
Plain:
A4/Letter
When Paper type is set to Plain, borderless printing will be disabled even
when Layout is set to Borderless.
Layout
Default (Borderless), Index, Bordered, Borderless, 4-up*
* Layout compatible with A4/Letter sized paper
Print date & Default (Off: No printing), Date, File No., Both, Off
file no.
Default *1, On (Exif Print), Off, Face*2, Red-Eye*2
Image
optimize *1 Photos are optimized for printing using the Photo optimizer pro function.
*2 Can be selected only on certain Canon-brand PictBridge compliant devices.
(May not be selected depending on the device.)
Trimming Default (Off: No trimming), On (follow the camera's setting), Off
> About PictBridge Print Settings (MP270 series only)
> Printing Photographs
Page top