Cleaning The Paper Feed Roller - Canon 3743B002 Basic Manual

User manual
Hide thumbs Also See for 3743B002:
Table of Contents

Advertisement

>
Routine Maintenance
Contents

Cleaning the Paper Feed Roller

If the Paper Feed Roller is dirty or paper powder is attached to it, paper may not be fed properly.
In this case, clean the Paper Feed Roller. Cleaning will wear out the Paper Feed Roller, so perform this
only when necessary.
You need to prepare: three sheets of A4 or Letter-sized plain paper
1.
Make sure that the power is turned on, and remove any paper from the Rear Tray.
2.
Open the Paper Output Tray gently, and open the Output Tray Extension.
3.
Clean the Paper Feed Roller.
(Maintenance) button repeatedly until b appears.
(1)
Press the
Press the Black or Color button.
(2)
The Paper Feed Roller will rotate as it is cleaned.
4.
Clean the Paper Feed Roller with paper.
Make sure that the Paper Feed Roller has stopped rotating, and load three
(1)
sheets of A4 or Letter-sized plain paper in the Rear Tray.
Make sure that b appears on the LED, then press the Black or Color button.
(2)
The machine starts cleaning. The cleaning will be completed after the paper is ejected.
If the problem is not resolved after cleaning the Paper Feed Roller, contact the service center.
Note
After the cleaning is completed, press the Stop/Reset button to return the LED to the copy
standby mode.
>
Cleaning the Machine
> Cleaning the Paper Feed Roller
Advanced Guide
Troubleshooting
Page top

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3744b002Mp270 seriesMp250 series

Table of Contents