For Windows Users - Canon 3743B002 Basic Manual

>
Advanced Guide Troubleshooting

For Windows Users

Printer Status Monitor Is Not Displayed
Check: Is the printer status monitor enabled?
Make sure that Enable Status Monitor is selected on the Option menu of the printer status
monitor.
1.
Open the printer properties dialog box.
Opening the Printer Properties Dialog Box (Windows)
2.
On the Maintenance sheet, click View Printer Status.
3.
Select Enable Status Monitor on the Option menu if it is not selected.
If you are using Windows Vista:
Launching MP Navigator EX Whenever Pressing the SCAN Button on the Machine
Check: Specify the response from pressing the SCAN button on the machine.
Follow the procedure below to specify the response on your computer.
1.
Log on as a user account with administrator privilege.
2.
Click Control Panel, Hardware and Sound, then Scanners and Cameras.
3.
Select WIA Canon XXX ser, then click the Properties button.
If the User Account Control screen appears, click Continue.
4.
Click the Events tab on the WIA Canon XXX ser Properties screen.
5.
Select Start this program for Actions, then select MP Navigator EX Ver3.0 from the
pull-down menu.
Choose an event from the Select an event pull-down menu, then select MP Navigator EX
Ver3.0 to launch for each event. If MP Navigator EX Ver3.0 is already selected for each
event, click Cancel.
6.
Click OK.
> For Windows Users
Page top