Canon 3743B002 Basic Manual page 538

> Printing Photographs Directly from a Compliant Device (MP270 series only)
Advanced Guide
Directly from a Compliant Device (MP270 series only)
series only)
Printing Photographs Directly from a Compliant Device (MP270
series only)
You can connect a PictBridge compliant device such as a digital camera, camcorder, or mobile phone
connect to the machine using a USB cable recommended by the device's manufacturer, and print
recorded images directly without using a computer.
Note
When printing photos with the PictBridge compliant device connected to the machine, we
recommend the use of the AC adapter supplied with the device. If you are using the device battery,
be sure to charge it fully.
Depending on the model or brand of your device, you may have to select a print mode compliant
with PictBridge before connecting the device. You may also have to turn on the device or select Play
mode manually after connecting the device to the machine.
Perform necessary operations on the PictBridge compliant device before connecting it to this
machine according to instructions given in the device's instruction manual.
1.
Make sure that the machine is turned on.
2.
Load paper on the Rear Tray.
3.
Make sure that the PictBridge compliant device is turned off.
4.
Connect the PictBridge compliant device to the machine using a USB cable (A)
recommended by the device's manufacturer.
The PictBridge compliant device turns on automatically.
If your device does not turn on automatically, turn it on manually.
When machine is correctly connected to the device, c will appear on the LED and the message that
the machine is connected will be displayed on the LCD of the device. Refer to the device's
instruction manual.
> Printing Photographs Directly from a Compliant Device (MP270
> Printing Photographs