Table of Contents
Advertisement
2.
Enter a name for the saved route, and then tap
When you save a route, Nextar Navigation System not only saves the route points but the
whole itinerary:
•
If you updated your map since you first saved the route, Nextar Navigation System
recognizes the change, and recalculates the driving instructions according to the latest
available map information.
•
Nextar Navigation System deletes from the route any via points that you already left
behind during navigation together with the road segments used to reach it. To avoid
this, if you want to save the route, you need to save it before you start navigating.
3.13 Loading a saved route
This feature is available in Advanced mode only.
The procedure is explained starting from the Map screen.
1.
Tap the following buttons:
2.
Tap the route you wish to navigate.
3.
In the very likely case when the start position of the saved route is different from the
current GPS position, you need to confirm whether you want to stop navigating from
the current GPS position to use the start point of the loaded route.
•
If you choose this option, automatic off-route recalculation will be disabled.
•
If you choose to keep the current GPS position as the start point, the route will
be recalculated starting from your current position.
4.
The map appears, and you can start navigating.
,
,
39
.
.
Advertisement
Table of Contents
